Informasjon
Disse skivene kommer i Høyre og Venstre. Alle skiver må beddes inn på gamle klosser, før det beddes bremseklosser.
Disc Bedding for Competition Use
All cast iron brake discs for competition use need to be bedded-in to ensure heat stabilisation and improve resistance to cracking. Cracks or even disc failure can occur during the first few heavy stops if careful bedding is not carried out.
AP Racing recommend the following procedure:
- If ducts are fitted they should be ¾ blanked off.
- Use previously bedded pads.
- For a minimum of 15 Km use brakes gently at first from initially low speeds - progressively raise speed to normal racing speed but still using gentle applications.
- For the final 2 or 3 applications brakes can be used quite heavily.
If AP Racing thermal paints are used then only the Green paint (430°C) should have fully turned to white and maybe also just the Orange paint (560°C) on the outside edges of the discs during the bedding procedure.
Note:
For details on Roadcar discs bedding click link below:
Roadcar Disc Bedding Instructions
Produsent
AP Racing
AP Racing
AP Racing er den ledende produsenten av bremser og clutch systemer for vei- og racerbiler.
Kjerneproduktutvalget inkluderer clutcher, kalipere, skiver, klosser, hovedsylindre, pedalbokser og luftjekker, samt vei- og bremsesystemer for motorsykler.
